Most U.S. homeowners pay a typical rate per linear foot for professional gutter cleaning, with total costs varying depending on home size, stories, and other factors, according to Angi’s cost data. The wide range comes down to three things: how many stories your house has, how clogged the gutters already are, and where you live.
- Use your gutter’s total linear footage or your home’s story count to get a fast, usable estimate before you call anyone.
Quick math: a single-story home with 150 feet of gutter runs a typical total amount, while a three-story home can cost noticeably more once access and debris factor in.
Key Takeaways
Gutter cleaning cost in the U.S. typically runs $0.95 to $2.25 per linear foot, or $119 to $234 per visit, with stories, debris, and region driving most of the variation.
| Point | Details |
|---|---|
| National range | Expect $119 to $234 per visit, or $0.95 to $2.25 per linear foot, for most single- and two-story homes. |
| Story count matters most | Three-story homes often run $310 or more per visit versus roughly $150 for single-story jobs. |
| Neglect costs extra | Heavily clogged or long-neglected gutters can add 10% to 50% to the base price. |
| Get quotes apples-to-apples | Share linear footage, stories, and gutter type, and confirm whether downspout flushing is included. |
| Larry’s Gutters prices by scope | Central Florida single-story cleanings typically run $150 to $220, with two-story homes at $220 to $350, based on actual footage and debris. |
Table of Contents
- Gutter Cleaning Cost by Linear Foot and Story Count
- How Much Gutter Cleaning Costs Varies by City
- What Actually Drives Your Gutter Cleaning Price
- Comparing Pricing Models and Common Add-Ons
- How to Get an Accurate Gutter Cleaning Quote
- DIY Gutter Cleaning vs Hiring a Professional
- How Often to Clean Gutters and What It Costs Per Year
- Larry’s Gutters: Central Florida Pricing in Practice
- Frequently Asked Questions
- Sources
Gutter Cleaning Cost by Linear Foot and Story Count
Contractors almost always price by linear foot because it ties labor directly to how much gutter actually needs clearing, rather than guessing from your home’s square footage. A sprawling ranch with a simple roofline can cost less to clean than a smaller home with a complicated, multi-angle roof.
The per-foot rate climbs with every added story, since ladders, harnesses, and extra caution slow the job down:
Those sample totals track closely with RoofScour’s 2026 pricing data, which lists single-story jobs averaging near $150, two-story jobs near $215, and three-story jobs closer to $310.
For a 100-foot home, expect the low end of each range; for 200 to 250 feet, expect totals near the high end or slightly above it. Not every contractor sticks to per-foot pricing, though:
- Flat rate by story: common for standard-sized homes where the contractor already knows roughly how long the job takes.
- Hourly pricing: appears more often with smaller companies or one-person crews, and Taskrabbit data puts the average around $37 an hour for gutter-related yard work.
- Per-square-foot of roof: rare, but sometimes used on large commercial or multi-unit properties.
How Much Gutter Cleaning Costs Varies by City
Where you live changes the bill more than most homeowners expect. Taskrabbit’s city-level data shows a New York City job running about $55 an hour with a typical invoice near $211, while a comparable Los Angeles job averages $45 an hour and about $168 total, according to Taskrabbit’s cost guide. Smaller metro areas and rural towns often land below the national average simply because labor costs less there.
| Market Type | Typical Hourly Rate | Typical Invoice |
|---|---|---|
| High-cost metro (e.g., NYC) | ~$55/hr | ~$211 |
| Mid-size metro (e.g., LA) | ~$45/hr | ~$168 |
| National average | ~$37/hr | ~$119 to $234 |
Regional wage differences tracked by the Bureau of Labor Statistics explain a good chunk of this gap.
What Actually Drives Your Gutter Cleaning Price
House height matters most, but it isn’t the only lever. Here’s what pushes a quote toward the high end of the range:
- Stories and roof pitch: steep or multi-story roofs can add roughly 15% or more for extra safety gear and time.
- Gutter length: more linear feet means more labor, plain and simple.
- Debris severity: gutters that haven’t been touched in a year or two, packed with compacted leaves or seedlings, often cost 10% to 50% more than routinely maintained ones, per Angi’s cost breakdown.
- Gutter type: seamless systems tend to clean faster and cheaper long-term than older seamed styles that trap debris at every joint. Seamless gutter installation is worth considering if you’re replacing an aging system anyway.
- Guards already installed: guards can complicate a first cleaning but usually reduce future visits.
- Season: peak leaf-drop and spring thaw periods run higher than midsummer.
Pro Tip: Clear large branches or debris piles yourself before the crew arrives. Some companies charge extra when a job requires unusual cleanup beyond standard gutter debris, and a five-minute head start can keep you off that surcharge.
Comparing Pricing Models and Common Add-Ons
Per-linear-foot pricing gives you the most accurate estimate because it scales directly with the actual work, but you’ll run into other models depending on the contractor:
- Per linear foot: most precise, best for comparing multiple quotes on the same house.
- Flat rate by story: simple and predictable, but can overcharge smaller homes.
- Hourly: common with independent contractors, riskier if debris is worse than expected.
- Per square foot of roof: occasionally used for large or commercial properties.
Add-ons catch a lot of homeowners off guard. Downspout flushing sometimes comes standard and sometimes costs extra. Minor repairs, hauling bagged debris off-site, and removing or refitting gutter guards for the cleaning all typically carry separate line items. When comparing bids, ask each contractor to break out the base cleaning price from every add-on so you’re comparing the same scope, not just the bottom-line number.
How to Get an Accurate Gutter Cleaning Quote
A vague phone call gets you a vague price. Give contractors this information up front:
- Total linear footage of gutters, or your best estimate.
- Number of stories and general roof pitch.
- Gutter type (seamless, seamed, half-round) and whether guards are installed.
- Photos of the current condition, especially visible debris or sagging sections.
- The last time gutters were cleaned.
- Any access obstacles, like fences, dogs, or landscaping near downspouts.
Then ask a few direct questions before booking:
- What pricing model do you use, and is downspout flushing included?
- What’s your debris disposal policy?
- Are you insured, and do you clean up afterward?
- Is there a warranty on any repairs made during the visit?
Most reputable crews include hand removal, blower cleanup, bagging, and haul-away as standard service, so get that confirmed in writing before the crew shows up.
DIY Gutter Cleaning vs Hiring a Professional
A basic DIY setup (ladder stabilizer, gutter scoop, gloves) runs $0 to $50 if you already own a ladder, and most single-story homes take 45 to 90 minutes to clear by hand. That’s real savings, but it comes with real limits.
- DIY works fine for: single-story homes, light debris, and homeowners comfortable on a ladder.
- Call a pro when: you’ve got multiple stories, heavily compacted debris, a steep or wet roof, or you want repair work backed by a warranty and insurance.
Falls off ladders send thousands of people to the ER every year, and a clogged gutter on a two-story home is not the place to test your balance.
Pro Tip: A $20 stand-off ladder stabilizer is the single best DIY purchase you can make. It keeps the ladder off the gutter itself, which is both safer and prevents you from denting fresh seamless gutters.
How Often to Clean Gutters and What It Costs Per Year
Frequency depends almost entirely on tree cover. No overhanging trees might mean once a year is plenty; heavy oak or pine canopy often calls for two visits, spring and fall.
- No overhang: one visit per year is usually enough.
- Moderate tree cover: two visits per year are common.
- Heavy pine or snow/ice climates: multiple visits per year are often recommended.
Quarterly subscription plans exist, but for most homes, two well-timed cleanings beat paying for four. Gutter guards can also cut cleaning frequency by up to 50%, which changes this math over a few years. See our gutter cleaning frequency guide for climate-specific timing.
Larry’s Gutters: Central Florida Pricing in Practice
Central Florida throws a specific challenge at gutters: frequent summer storms and fast-growing species like live oak and southern pine that drop debris almost year-round. A standard single-story clean here typically falls in the $150 to $220 range, and two-story homes usually land between $220 and $350, depending on linear footage and debris load.
- Every standard visit includes hand-clearing, blower cleanup, and haul-away.
- Downspout flushing is available on request.
- Storm season (June through November) often means shorter intervals between cleanings pay off. Our seasonal gutter maintenance guide breaks down what to check between professional visits.
A straightforward way to think about hiring
The most cost-effective approach for most homeowners is one or two professional cleanings a year, paired with a quick visual inspection after big storms. Skip the quarterly subscription unless heavy pine cover genuinely demands it; consult this roof maintenance guide to align your gutter cleaning with roof inspection schedules. Use the checklist above, get a written estimate, and compare apples to apples.
Get a Local Gutter Quote from Larry’s Gutters
If you’d rather not climb a ladder to find out what your gutters actually need, Larry’s Gutters handles cleaning, gutter guard installation, and repairs for homeowners across Central Florida, priced around your home’s actual linear footage and story count instead of a one-size-fits-all flat fee.
We inspect while we clean, so a loose seam or a sagging section gets flagged before it turns into a water damage problem instead of after. If you’re weighing guards against ongoing cleanings, our team can walk you through the gutter guard installation workflow and what it means for your annual costs. Request a free, written quote today and get a number based on your actual home, not a national average.
Frequently Asked Questions
What is the average cost of gutter cleaning in the U.S.?
Most homeowners pay between $119 and $234 per visit, with a national average near $168, according to Angi.
How much does gutter cleaning cost per linear foot?
Rates typically run $0.95 to $2.25 per linear foot, rising with story count and debris severity.
Does house height really change the price that much?
Yes. A three-story home can cost double a single-story home for the same linear footage, since access and safety equipment add significant time.
Are gutter guards worth it if cleaning already costs this much?
Guards run about $6 to $8 per linear foot to install but can cut cleaning frequency and cost by up to 50% over time. See our gutter guard guide for specifics.
How often should I budget for gutter cleaning each year?
Once a year covers homes with little tree overhang; heavy tree cover usually calls for two cleanings, spring and fall.
Sources
- How Much Does Gutter Cleaning Cost? 2026 Data | Angi
- Gutter cleaning cost guide | Taskrabbit
- Gutter Cleaning Cost: 2026 National Price Guide | RoofScour
- Gutter Cleaning Cost 2026: Service & DIY Pricing | TRB
- Bureau of Labor Statistics, Occupational Employment and Wages (OES)
